Zero Prep Clear Hand Sprayer Chassis & Underbody Protection Kit

Zero Prep Hand Sprayer Chassis & Underbody Protection Kit

Zero Prep is designed to protect your vehicle underbody, chassis and accessories from the elements. You can even apply  to damp rusty metal, existing underseal, almost anything under your vehicle.. Our long lasting rust prevention makes it perfect for all weather conditions - even when exposed to jet washing or road salts. Made in Bristol, Zero prep will keep your underbody not only protected, but clean!.

Small Kit - For small cars and 4x4's. (2x hand sprayers, and 2x Aerosols, with various injection attachments for those hard to reach places!)

Medium Kit - For medium size cars and 4x4's. (4x hand sprayers, 2 aerosols with attachments)

Large Kit -  For large cars and 4x4's (6x hand sprayers, and 4x aerosols with attachments).

Hand Sprayers are 500ML

Aerosols are 400ML

Colours!

We offer this kit in Clear If you want a specific colour please order aerosols or Schutz kit. Coloured hand sprayer kits are coming.

Benefits of Zero Prep

• LASTS! - Customer have seen nearly 5 years longevity. (we recommend you do a checkup every 12 months)
• DRY! - we cannot overstate this enough. Zero Prep DRIES, which means dirt and muck that hold moisture and salt don't stick to it! this is key to making it super easy to maintin, and last.
• EASY! - entering winter its nearly impossible to get your vehicle dry underneath. for Zero Prep that's not an issue!
• ACTIVE! - Zero prep contains Vapour Corrosion Inhibitors. These active anti corrosives actually assist expelling moisture.
• NANO TECH! - using mono molecular films the VCI provides a limited self healing ability in low air movement areas even where it is not  even applied!
• ANYWHERE! - Zero Prep doesn't damage rubbers, and helps limit corrosion in electrical joints. Its healthy across the board for the underside of your vehicle.

Zero Prep can also be used as a sealing coat for existing treatments, and will go over almost any other coating.

Application Instructions

• Remove mud /dirt. cold pressure wash is fine.
• Remove excessive water from cleaning with a brief drive, or air blower (can be applied to dry vehicles fine)
• using the hand sprayer turn the nozzle head to "spray"
• Apply coating liberally to all areas you want to protect. DO NOT apply to hot components such as exhaust if you have just driven it.
• Allow to cure touch dry before using vehicle (usually driveable within 60 minutes.