Extreme High Temp Aerosols up to 850C

I had to paint the exhaust manifold on my Land Rover Series 3 and only have to do it once, so of course I turned to Buzzweld. The coverage was very good and after 3 coats the manifold was looking very presentable. Time will tell if the paint is able to withstand the heat of the mighty Land Rover diesel, but early indications are good.

Like all Buzzweld products I have tried, I have been impressed and would use again.

Used to spray main cast engine block black and alloy head silver.Block thoroughly cleaned and sealed, primed and then sprayed. Coverage was good but had to apply four coats to get a half decent finish with the black, the silver paint only required one coat and gave a perfect finish straight away.
Overall good quality and will use again.

Good product. Good coverage, fast drying and a strong colour. Good spray pattern from the can too. The only negative is that it is a matte finish so you will need to purchase a HT clear coat too.

Following an email to Buzzweld I was recommended to use this paint for spraying the engine block and brake calipers. I used black for the engine and gearbox, and silver for the calipers. Although my project isn't complete and has never been outside or in contact with anything other than the moisture in the air, there is rust leaching through from under the paint on everything I've used this on, despite having cleaned the surfaces meticulously beforehand. Given the high quality of all the other Buzzweld products I've used, I have to say I'm pretty disappointed in this stuff.

Great advice from folks down at Buzzweld regarding best paint for Gearbox bell housing, delighted with the results, looks brand new. Another excellent product from Buzzweld, togther with helpful and friendly advice thrown in for free!

Used this for an engine refurb. Coated really evenly and left a great finish. Another great buzzweld product!

Picked this up as a Lucky dip aerosol, bright orange so thought I would give it a go on a rusty exhaust downpipe. Minimum prep on my behalf and used another make of VHT primer first. Despite this it has gone on well, good coverage and had built up well with a couple of coats...very bright too,very happy with the result. Hopefully I have enough left to respray my brake drums too!