Primer Designed to Boost the temperature tolerance of VHT above 200C and to minimise heat effects on colour by providing isolation of the colour from heat source.
Temperature tolerance will be raised to a peak of 250C for short durations, with damage occuring around 290C.
Exposure time, DFT (dry film thickness) and environment will affect the maximum achievable, and sustainable rating.
VHT colour rating remains at 200C actual, but the isolation above means the VHT can tolerant a higher temperature source than otherwise.
Apply in several light coats.
Allow to thoroughly dry prior to application of top coat.
Designed for steel but will adhere to keyed up aluminum.
- 1 aerosol will do four large calipers or drums. Lorry brakes 1 aerosol per axle (brakes)
07 September 2023 | Keith
Great product and fast delivery. Will definitely be using again.
Was this helpful to you? Yes / No
18 June 2021 | Stuart
Good product. Good coverage, fast drying and a good spray pattern from the can. I would recommend.
Was this helpful to you? Yes / No
13 February 2021 | Chris
I used this to prime some exhaust parts and high temp parts before an engine rebuild. Coupled with extreme HT colour on top this primer applied really easily and would honestly have given a great finish on its own! Really pleased with the results.
Was this helpful to you? Yes / No
06 June 2020 | Nuno
Arrived on time, worked perfectly to adhere the vht spray paint on my exhaust
Was this helpful to you? Yes / No 