Kit Contents
3x 750ML Chassis Guard Pro Hand sprayers
4x Splash Dewatering Aerosols
2x Splash dewatering hand sprayers
1x Seam nozzle for aerosols
1x 360 degree cavity injection lance 360 600mm
4x Chassis Guard Pro aerosols
Method of use.
- Degrease vehicle underbody. we recommend Fxdegreaser, but most degreasers will work.
- Pressure wash the vehicle as clean as you can.
- Using the supplied attachments, use splash aerosols to inject the coating into the chassis, sills, pillars, and any cavities. This will displace the water, penetrate the rust and seams and provide the perfect base for chassis guard pro. Invert cans and clear the attachments so they are ready for Pro later.
- Spray entire underside of vehicle in Splash using the Splash hand sprayers. This will shed the remnants of the water, and join up with the splash cavity coating for full protection.
- Leave to dry (estimate 6>12 hours)
- Apply Chassis Guard Pro using the attachments provided, and inject into the cavities. Use the aerosols for the cavities, and the hand sprayers for the exposed outside surfaces. Spray the vehicle from muiltiple angles so that you get all areas covered.
- Allow to cure ideally for 24 hours or more.
- Enjoy!
Left over product can be stored in a cool dry place, and used later on. Note sprayers may only function once if residue is left to cure in the head. Cleaning can be done with white spirit, eco thinner, or 1K multi thinner.
