Chassis Enamel Gloss Extreme
Buzzweld marine Chassis EnamelPaint - Chassis Gloss Extreme. 1L & 5L
- Slow Air Drying - to maintain a wet edge for improved brush / roller finish on Hulls and vehicle bodywork.
- Available in most colours
- Excellent Finish, even from a brush
- Tough finish
- Can be used for chassis, bumpers, bodywork over an existing painted or primed surface
- Amazing gloss retention
- Water and weather resistant.
- Durable coating
- Can be combined with non-skid material for steps, rock sliders, decks etc.
- High chemical resistance.
- Long Wet Edge for a superb Brush / Roller Finish
PRODUCT TYPES
- PLATINUM UPGRADE- The highest grade of Gloss Extreme- Infused with our compound to assist with :-
- Sound Deadening -Gloss Extreme Now limits sound transfer
- Resonance Suppression -Gloss Extreme Now actively combats resonance produced from panels
- Thermal Insulative properties -Gloss Extreme now significantly limits heat loss, and reduces energy required to keep a cab cool.
- Ceramic -Gloss Extreme is now more resistant to abrasion, gouging and has increased longevity due to increased porosity resistance
- Increased porosity resistance- Longer life
We recommend Buzzweld Rust Encapsulator for chassis / underbody primer, and epoxy for bodywork
If you request "black" we will amke RAL 9005 Black. Please enter colour name, colour code, and manufacturer of the colour where possible. For example Land Rover LRC 001
16 June 2024 | Neil
Used today for the first time. Amazing coverage, sticks to literally anything, just ordered more in black for my axles
Was this helpful to you? Yes / No
25 September 2021 | Mr.
Hand painted on to the inner wings then coated with WAR. The extreme covers easily giving a fantastic finish even by hand. Will protect car for years. Great product.
Was this helpful to you? Yes / No
15 April 2020 | Simon
I'm rebuilding the swivels on a my 90 and wanted to make a proper job of it so ordered chassis black gloss extreme.
It covered the RE amazingly well and the finish is just what I was after, high gloss.
Delivery was super fast too.
Was this helpful to you? Yes / No
14 July 2019 | Phil
Top class service from start to finish excellent will use again
Was this helpful to you? Yes / No
13 September 2017 | Chris
Very good product will be using again
Was this helpful to you? Yes / No
15 January 2017 | Paul
I have used Hammerite annually for about 7 years on my Defender X-Members but decided to give Buzzweld a whirl this year.
I opted for the the Aerosol so spent a while masking up but has been well worth the time. RCP primer and Chassis Black Gloss and I have great results.
Would happily recommend Buzzweld
1 of 1 people found this review helpful.
Was this helpful to you? Yes / No
Extreme Gloss Chassis Black 04 December 2016 | Jack
After spraying my rear crossmember with Oxide-X and leaving for 24 hours, i went about painting it with the Extreme Gloss paint, i dont have the facilities to spray,so brushing it on was the only option, i wasn't sure how it would go on, but it went on exceptionally well, leaving a good bright shiny finish, i painted it in early february and it wasn't exactly warm when i did it. Almost a year on its still lasting, and isn't showing any signs of flaking or rust bubbling through. Hoping to order more for my dads 90!
18 November 2016 | Ben
Excellent product, fast drying and fantastic finish! Ideal for chequer plate, wheels etc!
1 of 1 people found this review helpful.
Was this helpful to you? Yes / No
18 November 2016 | Ben
Used on my TD4 Freelander wheels, excellent finish and used on top of oxide-x! another amazing product from Buzzweld
Extreme Gloss Chassis Black[1] 22 October 2016 | Dean
This paint was easy to apply with my limited spraying ability, chose to use a gun as opposed to tin as didn't know how much I would need, coverage was excellent & smooth couple of runs but that's my lack of spraying skills not the paints fault, superb high gloss finish & dried within a couple of hours cheers Craig for your help
