2K Epoxy High Build Tintable Primer zinc rich 5L
2K Epoxy Tintable, with self etching high adhesion., and activated zinc phosphates
- Smooth finish
- High etching adhesion
- Superb chemical resistance
- Works on Iron, steel, light alloys, galvanised steel*, Fibreglass and other difficult substrates
PLATINUM- The highest grade of Epoxy Infused with our compound to assist with :-
- Sound Deadening -Now limits sound transfer
- Platinum has increased porosity resistance
- Resonance Suppression -Actively combats resonance produced from panels
- Thermal Insulative properties -Significantly limits heat loss, and reduces energy loss / transfer.
- Ceramic - More resistant to abrasion, gouging and has increased longevity due to increased porosity resistance
By selecting the Platinum option you are purchasing the highest grade we can produce. For ultimate sound and thermal insulation we recommend applying Cosyfoam over this epoxy.
2K Epoxy Product specifics
- 4:1 mixing ratio
- Dilute 5>10% for spraying
- can be brush / roller applied
- Airless or conventional spray compatible.
- 1>2 cats to reach desired thickness
2K Epoxy Drying Times @20C
- Flash Off 10 minutes
- Dust Free 30 minutes
- Through Dry 24 hours
- Full Cure 28 DAYS
- Overcoating Window 6>96 hours max. sand after this depending n conditions.
2K Epoxy Oven Times
Flash off 10 mins, 50C for 30 mins
2K Epoxy Coverage
7m2/ Litre @ 50um DFT
2K Epoxy Chemical Data
SG 1.3
VOC 400g/l
2K Epoxy Additional Information
1L Kit comes with 720ML base, / 200ml Hardener+ pot of colour to be added to the main tin.
5L Kit comes with 3.6L base, 1L Hardener + pot of colour to be added to the main tin.
Please note. The total volume of each "kit" will vary by up to 5% based on how much tint is required to be added by us prior to dispatch. If you do not specify a colour we will send Mid grey RAL 7035.
T-wash new galvanised steel or allow to weather.
14 November 2024 | Scott
What a amazing product excellent coverage and works well
Was this helpful to you? Yes / No
28 July 2024 | Tom
Excellent primer. Easy to use and mix with good coverage even for a novice.
Was this helpful to you? Yes / No
21 October 2023 | Gareth
Craig recommended this primer for my 101 project, mixing was simple, half a litre at a time. Rollered it on and coverage was fantastic, being tinted it meant I needed less top coats
Was this helpful to you? Yes / No
Bodyshop - Best on the market 07 July 2023 | Prestige
Hi Craig
Pictures of the camper van we have just primed in your 2k tintable epoxy which is a great product, the best on the market, no lift at edges, and high adhesion on edges even when sanded through.
regards
Steve
Prestige
https://www.prestigeautorefinishing.co.uk/
19 June 2023 | Robert
Haven't used yet, but advice on the phone was great
Was this helpful to you? Yes / No
Painting the underside of pick up bed from bare metal 26 May 2023 | Andrew
Mixed this to the stated instructions in small batches as I was concerned about drying time and coverage. Started with a brush but quickly realised that 4" roller was the way to go, needed 3 coats to properly cover bare metal. Colour match was good which I selected from colour card on collection of product.
Now ready for coat of colour match WAR to finish the job.
Was this helpful to you? Yes / No 