1K Epoxy Primer Speed Prime
1K Epoxy Primer Speed Prime is a very fast curing, high adhesion primer for most metals.
- Smooth finish
- High etching adhesion
- good chemical resistance
- Works on Iron, steel, light alloys, galvanised steel*
- Touch dry in as little as 60 seconds
- Overcoatable in as little as 5 minutes
- Compatible with most top coats
- Airless, Conventional, Aerosol, or brush roller application.
PLATINUM- The highest grade of Speed Primer Epoxy Infused with our compound to assist with :-
- Sound Deadening -SP Now limits sound transfer
- SP Platinum has increased porosity resistance
- Resonance Suppression -SP Now actively combats resonance produced from panels
- Thermal Insulative properties -SP now significantly limits heat loss, and reduces energy loss / transfer.
- Ceramic -SP is now more resistant to abrasion, gouging and has increased longevity due to increased porosity resistance
By selecting the Platinum option you are purchasing the highest grade of SP we can produce. For ultimate sound and thermal insulation we recommend applying Cosyfoam over SP.
1K Epoxy Primer Speed Prime specifics
- Matt Finish
- Black colour (if you do not request another colour)
- 40% solids
- 13M2 coverage (theoretical)
- 1>2 coats to reach desired thickness
1K Epoxy Drying Times @25C
- Flash Off 10 minutes
- Dust Free 20 minutes
- Through Dry 12 hours
- Full Cure 28 DAYS
- Overcoating Window 0.5 > 8 hours hours max. sand after this depending on conditions.
- Shelf life 12 months if unopened
Airless spray: Tip size 11 – 13 thou (0.28-0.33mm) typical
Brush / roller for smaller areas only
T-wash new galvanised steel or allow to weather.
27 October 2024 | Edward
Decent paint - seemed a little thin to me but covered after two coats. Time will tell if its been a good choice or not
Was this helpful to you? Yes / No
Response:
Hi Edward, this is correct. Our 1K Epoxy offers a lower film build than a normal 1K aerosol, and as a result has extremely high adhesion.
Regards, Craig.
15 August 2024 | Leslie
very good, fast drying time. staff very helpful.
very pleased
Was this helpful to you? Yes / No
1K Epoxy Primer Speed Prime 13 June 2024 | Loz
doe,s what it says on the can..very quick drying ideal for jobs requiring speed....!
Was this helpful to you? Yes / No
Great product easy to use 17 April 2024 | LEE
Great product easy to use great coverage
1 of 1 people found this review helpful.
Was this helpful to you? Yes / No
17 February 2024 | Jane
Very good price and good coverage
Was this helpful to you? Yes / No
31 December 2023 | Michael
An excellent product and easy to use. I brushed on two coats, light sanding between coats and then applied two top coats.
Was this helpful to you? Yes / No
Slow to build but seems great so far 14 September 2023 | Ville
I was recommended this after contacting Buzzweld about a project I was doing. Time will tell with a primer I guess but this was nice and easy to work with and the colour made it very easy to figure out which parts were done and which not. Took away a star as I had hoped it would build a bit more, I seemed to use quite a bit of product (aerosol) to get a good coverage. Still would highly recommend and will be ordering more in the future
2 of 4 people found this review helpful.
Was this helpful to you? Yes / No 