Small Car (monococque) Rustproofing / Undersealing

Small Car (monococque) Rustproofing / Undersealing

Please call 01454537637 to book

Platinum     Premium      UP Black      UP Clear

Platinum Underbody Rustproofing treatment

1. Remove arch liners
2. Remove under trays
3. Remove exhaust
4. Remove heat shields
5. Steam clean underbody
6. Heat and clean cavities with 155C steam
7. Needle gun and sand the underbody/ suspension
8. Stripe coat Underbody
9. Cavity  paint cavities
10. Black UP Cavities
11. Primer underbody (re or 2K Armour)
12. Top coat underbody (WAR)
13. 1 year full inspection, secondary stage, and cavity topup included

Premium Underbody Rustproofing Treatment

1. Remove under trays
2. Steam clean underbody
3. Needle gun and sand the underbody/ suspension
4. Stripe coat Underbody (RE)
5. Black UP Cavities
6. Blackit
7. 1 year inspection included

UP Underbody Preservation Black

Same Day Black  anti-corrosive treatment that dries properley, creates an easy to maintain surface that has self cleaning abilities.

We treat the entire underside of your vehicle, including subframes, axles / suspension, and underbody such as sills up to the jacking seam, in almost all cases including wheel arches.

U.P. has significant time and cost benefits over waxes and paints as it can be completed same day.

U.P. is specifically formulated to be applied to a wet surface that has had minimal preparation.  U.P. will offer great protection above that of oils, and other waxes at low preparation levels.

Benefits include

1. U.P. does not hide existing issues. You can spot problems as they occur and maintain accordingly.
2. Greatly improves aesthetics, for minimal cost
3. PREVENTS road salts and dirt sticking to the underside.
4. LOW reactivity. U.P. is compatible with most existing paints and treatments making it ideal as a Patina Preserver, and a topup protection system.
5. EXTREME creep from absorption, as well as capillary action. 
6. U.P. flows in between spot welds, and absorbs into corrosion forcing out the residual moisture and air, suffocating the ability for corrosion to continue.
7. FAST CURE. U.P. can be touch dry in as little as 30 minutes.
8. High temperature tolerance. Survives on the exhaust system up to but not including the downpipe.
9. Forces out moisture from wiring looms, and electrical connectors.
10. Presents an easy to clean surface.
11. Vehicle underbody stays dryer for longer, and holds less water in adverse conditions.
12. Hydrophobic- water beads off.
13. Dries properly, does not wash away, or attract dirt/ debris
14. Makes maintenance work ALOT easier- cleaner, drier, less rust.
15. EASY to weld, or prepare an area that has been treated.

We estimate the lifespan of U.P. conservatively to be between 12 and 36 months to first maintenance. This will vary based on the existing condition, and useage.

Typical Process.

1. Steam clean and inspect underbody
2. Steam cleaning @155C of underbody
3. Air jetting down to remove excess moisture
4. Sheet off body to protect from overspray
5. Application of UP to underbody and cavities and arches (where accessible.

UP Underbody Preservation Clear

Same Day Clear anti-corrosive treatment that dries properley, creates an easy to maintain surface that has self cleaning abilities.

We treat the entire underside of your vehicle, including subframes, axles / suspension, and underbody such as sills up to the jacking seam, in almost all cases including wheel arches.

U.P. has significant time and cost benefits over waxes and paints as it can be completed same day.

U.P. is specifically formulated to be applied to a wet surface that has had minimal preparation.  U.P. will offer great protection above that of oils, and other waxes at low preparation levels.

Benefits include

1. Clear- U.P. does not hide existing issues. You can spot problems as they occur and maintain accordingly.
2. PREVENTS road salts and dirt sticking to the underside.
3. LOW reactivity. U.P. is compatible with most existing paints and treatments making it ideal as a Patina Preserver, and a topup protection system.
4. EXTREME creep from absorption, as well as capillary action. 
5. U.P. flows in between spot welds, and absorbs into corrosion forcing out the residual moisture and air, suffocating the ability for corrosion to continue.
6. FAST CURE. U.P. can be touch dry in as little as 30 minutes.
7. High temperature tolerance. Survives on the exhaust system up to but not including the downpipe.
8. Forces out moisture from wiring looms, and electrical connectors.
9. Presents an easy to clean surface.
10. Vehicle underbody stays dryer for longer, and holds less water in adverse conditions.
11. Hydrophobic- water beads off.
12. Dries properly, does not wash away, or attract dirt/ debris
13. Makes maintenance work ALOT easier- cleaner, drier, less rust.
14. EASY to weld, or prepare an area that has been treated.

We estimate the lifespan of U.P. conservatively to be between 12 and 36 months to first maintenance. This will vary based on the existing condition, and useage.

Typical Process.

1. Steam clean and inspect underbody
2. Steam cleaning @155C of underbody
3. Air jetting down to remove excess moisture
4. Sheet off body to protect from overspray
5. Application of UP to underbody and cavities and arches (where accessible.