BLACKIT is a new formula of underbody rustproofing wax we developed as an upgrade top a typical waxoil / wet wax
Blackit dry rustproofing underseal wax
Blackit is a tough, dry, black wax for underbody blacking and protection.
offers a viable cost effective alternative to Wax Oil, wet waxes such as dinitrol, and hard underseals such as tetrosyl.
- Great coverage and protection.
- Dries properley.
- Resists damage from cleaning
- easy to apply
- based on a marine hull coating.
Blackit dry rustproofing underseal wax
Thinning
Product Types
1000ml Paint Tin
Normal paint tin for brush / roller / thinning and spraying
1000ML Schutz Undercoating Tin
Stubby Schutz Tin. These tins work with our FX10 Spraygun & FX11 Spraygun. The gun screws directly on. To use a normal Schutz gun with a stubby schutz tin, you need to trim the pickup tube 75mm shorter.
5000ml Paint Tin
Normal paint tin for brush / roller / thinning and spraying
400ML Aerosol (traditional)
Traditional aerosol loaded with Product.
400ML Buzzweld Powercan The Aerosol powercan uses NO THINNER. as a result the can outputs the same amount of paint as a spraygun. This means less coats, a much higher film build and time saved. HOWEVER- the cans empty themselves very quickly. Protection VS coverage. When using a powercan you need to spray from further away. This can can also be used as a textured bedliner spray (comes with two nozzles).
28 November 2024 | Jamie
Easy to apply, good coverage. Surprising how much area out of one can
Was this helpful to you? Yes / No
Blackit dry rustproofing underseal wax 03 April 2021 | Norman
Excellent product
Was this helpful to you? Yes / No
19 March 2021 | Ben
Dries pretty hard and goes on easy. Have used quite a bit of it on my chassis. Works out pretty cheap. Not been able to get it to come out of the shultz gun with a lance on but goes on nicely with a brush or a shultz gun without the lance on.
Was this helpful to you? Yes / No
02 October 2020 | Jason
What a pleasure this was to apply via a fx10 schults gun. I love the finish on my chassis and it is a great top coat to the RE primer 👌
Was this helpful to you? Yes / No
Really nice product to Use. 21 September 2020 | Karl
Was disappointed with both the two weeks delay for the under seal wax to arrive, and even more so that despite both two emails and a face book message it took Buzzweld nearly as long to get back to me and tell me where my order was!!
That aside, once it arrived I was very pleased with the product. It covered really well, looked uniform in its coverage and a single can lasted ages. Will see how it weathers, but currently I would recommend the product but give caution about the customer service.
Was this helpful to you? Yes / No
22 June 2020 | Roy
Left it in the sun for half an hour went on really well covered over the encapsulator coating no problem loos good .
Was this helpful to you? Yes / No
26 May 2020 | Peter
Another quality product. I have used this on my Defender chasis and choice to brush it on it went on easily and with no a lot of mess
Was this helpful to you? Yes / No
Blackit on a double cab pickup 24 May 2020 | Jonathan
Had this for a couple of weeks, not had the chance to do the prep and apply,
So, bank holiday weekend, steam clean under the motor, clean off crud with a big screw driver and leave to dry,
Give the first can a good shake and set to work, start at the back end of the pickup, it keeps going and going, amazing amount of material in a can, get down 3/4 of a chassis rail all sides with a decent amount of coverage,
Carry on around, 4 cans and got a good first coat on, looks the mutts, nice finish, decent cover and drying lovely in the sunny weather, quick cuppa and hopefully get another coat on,
Was this helpful to you? Yes / No
13 April 2020 | Callum
This is a really good product; especially for the price. It goes on really east, with decent coverage even after a single coat.
I was pleasantly surprised by the coverage. It seems to apply very evenly, which isn’t common for aerosol underseal products, as usually the nozzle gets blocked which reduces the spread of the spray.
I have a medium sized hatchback, and I used 4x 400ml cans to do the front and rear arches, and seals. For a whole car, I would ideally have bought 6 cans
Was this helpful to you? Yes / No
07 April 2020 | Matthew
Firstly Craig sent this out to me after I accidentally redecorated my driveway with CIO (which deserves a review in itself as this is brilliant customer service and not something any other company would do!), I used black it on my rather tatty axles and has transformed them, it is simple to apply with a brush and is lovely and thick, it was so nice to work with I would happily do the entire chassis however I have already stocked up on several tins of WAR!!
As a foot note my driveway is still hasn't started to rust!!
Was this helpful to you? Yes / No
Read all 12 customer reviews...
