Bedec MSP Satin Multi Surface Paint
Bedec MSP Satin Multi Surface Paint is a versatile, self priming and self undercoating interior and exterior paint for use on a wide variety of surfaces. Ideal as a decorative, protective coating for most building surfaces including concrete, brickwork, rendering, asbestos, bitumen, iron, aluminium, lead, zinc, copper, timber, slate, most plastics, fibreglass and cement fibre board. It's water based, microporous finish that is non yellowing and has low VOC content. Made in Britain.
MSP is also suitable for weathered substrates such as creosote, bitumen, galvanised and plastic coated cladding.
- No undercoat or primer needed*
- Any colour available from Buzzweld
- Microporous & breathable
- Resists flaking and cracking
- Class 0 fire rated, resists heat up to 80
- Alkali resistant
*Primer required on mild steel
NOT suitable for areas under constant water contact, high traffic areas, decking or wood treated with water repellant treatments.
Specifications
| Area | Interior & Exterior |
| Recommended Use | Plastic, wood, metal, radiators, plastic coated steel, cladding, brick, masonry, fibreglass, terracotta, stone, plaster, MDF, tiles, melamine, plastics, UPVC, galvanised steel, aluminium, copper. |
| Base | Water-Based |
| Coverage | Brush or roller 12-14 m² per litre, sprayer approx 6-8 m² per litre |
| Drying Time | 2 - 4 Hours |
| Re-Coat Time | 4 Hours, fully hardened after one month. |
| Recommended Coats | 2-3 Coats |
| Application Method | Brush, Roller, Conventional Spray, Airless Spray |
| VOC Levels | Low |
| Clean Up | Remove as much paint as possible from the equipment before cleaning with water |
