1K Epoxy Primer Speed Prime

1K Epoxy Primer Speed Prime is a very fast curing, high adhesion primer for most metals.

Smooth finish

High etching adhesion

Good chemical resistance

Works on Iron, steel, light alloys, galvanised steel*

Touch dry in as little as 60 seconds

Overcoatable in as little as 5 minutes

Compatible with most top coats

Airless, Conventional, Aerosol, or brush roller application.

What Is Platinum Epoxy?

>Sound Deadening -SP Now limits sound transfer<

>SP Platinum has increased porosity resistance<

>Resonance Suppression -SP Now actively combats resonance produced from panels<

>Thermal Insulative properties -SP now significantly limits heat loss, and reduces energy loss / transfer.<

>Ceramic -SP is now more resistant to abrasion, gouging and has increased longevity due to increased porosity resistance<

By selecting the Platinum option you are purchasing the highest grade of SP we can produce. For ultimate sound and thermal insulation we recommend applying Cosyfoam over SP.

1K Epoxy Primer Speed Prime Specification

>Matt Finish<

>400ml Aerosol<

>40% solids<

>13M2 coverage (theoretical)<

>1>2 coats to reach desired thickness<

>1K Epoxy Drying Times @25C<

Flash Off         10 minutes

Dust Free        20 minutes

Through       Dry 12 hours

Full Cure           28 DAYS

>Overcoating Window 0.5 > 8 hours hours max. sand after this depending on conditions.<

>Shelf life 12 months if unopened<

>Airless spray: Tip size 11 – 13 thou (0.28-0.33mm) typical<

>Brush / roller for smaller areas only<

>T-wash new galvanised steel or allow to weather.<